|
广州市新洪源空气净化制品有限公司 
| 联系人：陈敏珍 女士 (销售经理) |
 |
| 电 话：020-36043612 |
|
| 手 机：13602835232 |
|
 |
|
 |
|
| 供应烤漆房顶篷过滤棉 |
产品特性：
备有“斯宝特”SP-600G/560G、“洁霸”JE-600G/560G可选；
该系列顶篷棉主要应用表面喷涂行业，专门为喷涂室末端过滤而设计，由抗断裂的合成纤维构成的高性能热熔法无纺布加工而成;
递增结构，多层逐级加密技术，即往纯净空气方向的纤维密度逐渐增大，较高过滤效率，延长使用寿命；
粘性处理，因粘剂完全渗透介质而使尘埃粒子无法通过，得到全面过滤的空气均匀扩散，形成层流状态，达到*佳的喷涂效；
符合防火分类标准欧洲DIN53438-F1和美国UL900-Class2;
卷面印有EN-779标准分类，DIN标识，新洪源的注册商标；
滤料出风面致密、覆网加固，初阻力低、容尘量高、阻燃性好、使用寿命长、经济可靠;
耐湿性强，可达100%相对耐湿度。
Speciality:
SP-600G/560G; JE-600G/560G
The series of ceiling filters are mainly used in surface spray-paint industry, especially for final filtration in spray booth, which is processed by high-powered nonwovens of antibreak synthetic fiber.
With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency, extended working life.
Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results.
Conforming to European DIN53438-F1 and American UL900-Class2
The outlet side is printed with EN-779 standard classifications, DIN logo, the registered trademark of SHW.
Dense outlet side, low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable, the surface is reinforced by covered net scrim.
Moisture resistance, up to 100% relative humidity
技术参数 (Specification)：
类型
Type 级别
Filter
Class 平均
计重效率
Average
Arrestance 初始效率
[比色法]
Initial Efficiency 测试风速
Nominal
Velocity
(m/s) 额定风量
Rated
Airflow
(m3/h) 初阻力
Initial
Resistance
(Pa) 终阻力
Final Resistance
(Pa) 容尘量
Dust Holding Capacity
(g/m2) 持续耐温
Continuous
Temperature
（℃） 瞬间耐温
Instantaneous Temperature
（℃） 厚度
Thickness
(mm) 标准尺寸
Sizes
SP-600G F5 98% 55% 0.25m/s 900 m3/h 30Pa 450Pa 460
g/m2 100℃ 120℃ 22mm 1.6*21M
2.0*21M
SP-560G F5 96% 50% 0.25m/s 900 m3/h 25Pa 450Pa 400 g/m2 100℃ 120℃ 25 mm 1.6*21M
2.0*21M
JE-600G F5 98% 55% 0.25m/s 900 m3/h 30 450Pa 460
g/m2 100℃ 120℃ 22mm 1.6*21M
2.0*21M
JE-560G F5 96% 50% 0.25m/s 900 m3/h 25 450Pa 400 g/m2 100℃ 120℃ 25 mm 1.6*21M
2.0*21M
注：可按客户要求订做
Note: Other specifications are available on request |
 |
| |
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。